Explorer Technology Group DLV50 - Deleting ALL (Voltmeter and Hydrometer) Strings; Editing Individual VDC;HYD String Threshold Limits; Remove ALL (Voltmeter and Hydrometer) Thresholds Limits

4.2.2 Deleting ALL (Voltmeter and Hydrometer) Strings
(i) From the
Main Menu select “Delete ALL”.
(ii) Press “YES” to delete ALL voltmeter strings and ALL hydrometer strings.
This process cannot be undone!
4.2.3 Editing Individual VDC/HYD String Threshold Limits
(i) Select required VDC/HYD string.
(ii) Press “Menu” to select the VDC/HYD sub-menu and select “Limits”.
For example, to edit string A voltage limits:
To remove the limits for the selected voltage string:
- Push the “UP” key to select “
Remove Limits? Y/N” to remove limits.
- Push “ENTER”.
To edit the limits for the selected voltage string:
- With “
Remove Limits? Y/N” , Push “ENTER”.
- Use the “UP” and “DOWN” keys to edit the “Max” Limit then push “ENTER” to
select.
- Use the “UP” and “DOWN” keys to edit the “Min” Limit then push “ENTER” to
select.
(iii) Press “YES” to delete the VDC string.
4.2.4 Remove ALL (Voltmeter and Hydrometer) Thresholds Limits
(iv) From the Main Menu select “Reset Limits”.
(v) Press “YES” to remove ALL voltmeter limits and ALL hydrometer limits.
This process cannot be undone!
Remove Limits? Y/N
Voltage Limits:
Max : 2.245
Min: 2.150
BACK
ENTER
VDC String A:000