4.0 Deleting String Data and Editing Test Thresholds
4.1
Option 1: Using Winmeter 5.0 Software
4.2
Option 2: Manually
4.2.1 Deleting Individual VDC/HYD Strings
4.2.2
Deleting ALL (Voltmeter and Hydrometer) Strings
4.2.3
Editing Individual VDC/HYD String Threshold Limits
4.2.4
Remove ALL (Voltmeter and Hydrometer) Thresholds Limits
5.0
Taking DC Cell Voltage Measurements
5.1
Measuring DC Cell Voltages
5.2
Over Voltage Indication
5.3
Recording Over a Previous Measurement
5.4
Deleting a Previous Measurement
6.0
Uploading Hydrometer Data to the DLV50
6.1
Transferring Data from a DMA35 Digital Hydrometer to the DLV50
7.0
Connecting the DLV50 to PC/Winmeter 5.0
8.0
Upgrading DLV50 Firmware
For the most accurate results, please read and follow these instructions carefully.
To Next Page
Loading...