16
INSTALLATION AND START UP
Drain connection checklist
1. Connect one end of the exible drain
tube to the drain cup outlet by inserting
it through the access hole in the panel
mounted in the bottom of the chassis. (It
is located under the drip tray and grill.
Contact a service technician to do this
task you are unsure how to access this
area of the machine.)
2. Connect the other end of the drain tube
to the domestic plumbing drainage system
in the service area.
3. Replace/reinstall the drip tray and grill.
Flexible drain
tube
Drain cup
Pro Tip:
Ensure that the drainage tube is not twisted and that it is below the level of the drain cup to
prevent trapping water and other residue in the tube which could mold or produce bad smells.
To Next Page
Loading...
