31
USER PROGRAMMING
Dose programming Coffee
Use the following steps to program the espresso brew dosages for each drink button (each button can
be programmed for a different dosing volume if desired):
1. Press the Dose Programming
button to enter the
programming menu.
2. Select the group to be
programmed.
3. The key selected to be
programmed will be
highlighted in orange. Use the
▲/▼ arrows to adjust the
dose volume. Use the to
conrm the new dosage, then
use the ► arrow to proceed
the next group or the X to
exit.
Note:
The factory default brewing dose volumes are as follows:
Coffee Key 1: 80ml, Single espresso
Coffee Key 2: 110ml, Lungo espresso
Coffee Key 3: 140ml, Double espresso
Coffee Key 4: 10ml, Quick ush
Start / Continuous Key: unmetered, continuous ow
For safety and water conservation, all brewing settings have
a maximum dispensing time of 5 minutes.
i
Dose programming Tea
Use the following steps to program the espresso brew dosages for each hot water dispensing button
(each button can be programmed for a different dosing time if desired):
1. Press the Dose Programming
button to enter the
programming menu.
2. Select the Tea key. 3. The key selected to be
programmed will be
highlighted in orange. Use the
▲/▼ arrows to adjust the
dose volume. Use the to
conrm the new dosage, then
use the ► arrow to proceed
the next group or the X to
exit.
Note:
The factory default hot water dispensing time are as follows:
Key 1: 8s
Key 2: 6s
i
To Next Page
Loading...
