20
INSTALLATION AND START UP
Power switch
Heating symbol
Steam knob
Initial starting procedure
Before using the machine be sure to:
1. Ensure the machine’s domestic water supply is opened at the tap.
2. Turn on the main power switch and wait a few minutes for the boiler to heat up.
3. Conrm that the heating icon is illuminated while the boiler is heating.
4. While the machine is heating up, run a drink cycle through each group to bleed air out of
the group boilers and to ensure they are working.
5. Open the steam knobs/taps to ensure they are working.
The machine is now ready to use.
To Next Page
Loading...
