Expobar Diamant Pro - SmartSteam

DIAMANT Pro
36
USER PROGRAMMING
Cup warmer
1. Press the Cup Warmer button to enter the programming
menu and adjust the temperature you want your cups to
be warmed up between: Low, Mid or High
10:05
Friday, 24 March
OFF SCREEN
SETTINGS MENU
Profiles menu
ENTER PASSWORD SCREENMAIN DISPLAY
OFF
10:05
Friday, 24 March
NAME / Alarm
User
Settings
Technician
Settings
Factory
Settings
10:05
Friday, 24 March
SETTINGS
5
Brewing screen BARISTA MENU BREWING DISPLAY DOSE MENU PREINFUSION MENU PREINFUSION MENU
96.5 ℃ 96.5 ℃ 96.5 ℃
23.5 18.5 10.5
120.0 ml 90.0 ml 70.0 ml
BARISTA MENU
START 00:00
STOP 00:00
MONDAY
MONDAY
10:05
Friday, 24 March
DIAMANT
118 ℃
1 2
3
2 31
AUTO AUTO AUTO
1
1->2 1->2
2 3
AUTO
ml
DOSE GR1 COUNTERS GR.1
K1 80
K2 110
K3 140
K4 10
K1 00000
K2 00000
K3 00000
K4 00000
K5 00000
RESET
Use the following steps to program the cup warmer settings:
SmartSteam
1. Press the SmartSteam button
to enter the programming
menu.
2. Scroll using the arrows
to enter to the following
and adjust the following
parameters:
10:05
Friday, 24 March
OFF SCREEN
SETTINGS MENU
Profiles menu
ENTER PASSWORD SCREENMAIN DISPLAY
OFF
10:05
Friday, 24 March
NAME / Alarm
User
Settings
Technician
Settings
Factory
Settings
10:05
Friday, 24 March
SETTINGS
5
Brewing screen BARISTA MENU BREWING DISPLAY DOSE MENU PREINFUSION MENU PREINFUSION MENU
96.5 ℃ 96.5 ℃ 96.5 ℃
23.5 18.5 10.5
120.0 ml 90.0 ml 70.0 ml
BARISTA MENU
START 00:00
STOP 00:00
MONDAY
MONDAY
10:05
Friday, 24 March
DIAMANT
118 ℃
1 2
3
2 31
AUTO AUTO AUTO
1
1->2 1->2
2 3
AUTO
ml
DOSE GR1 COUNTERS GR.1
K1 80
K2 110
K3 140
K4 10
K1 00000
K2 00000
K3 00000
K4 00000
K5 00000
RESET
Use the following steps to program the SmartSteam settings:
SMART STEAM TEMP
65 C
SMARTSTEAM TEMPERATURE:
Temperature that the smart steam wand needs to reach before closing steam valve
FLUSH TIME:
Trigger to release auto-cleaning. If the steam wand hasn’t been used in the last 5-30 min (as chosen), and
the steam wand is in home position, it will start the auto-cleaning cycle. If not the “CLEANING
OVERDUE” alarm will be triggered.
SET AUTO FLUSH TIMER:
Time in which the steam valve (not pump) will open to perform auto-cleaning.
SET PUMP SPEED:
Speed that the peristaltic pump will be using, based in %PWM regulation.
SMARTSTEAM TEMP OFFSET:
Parameter to stablish difference between peristaltic pump and steam valve. Peristaltic pump will stop at
TSET-ST.OFFSET.