Why my Expobar Diamant Pro does not start?
If your Expobar Coffee Maker doesn't start, first ensure the plug is correctly inserted into a working power socket. Also, check that the circuit breaker and/or differential are connected. If the cable and/or plug are damaged, call service personnel to replace them.
What to do if my Expobar Diamant Pro Coffee Maker coffee dispensing is too slow?
If coffee dispensing is too slow with your Expobar Coffee Maker, the coffee grind may be too fine. Try switching to a coarser grind of espresso.
How to fix too fast coffee dispensing on Expobar Diamant Pro Coffee Maker?
If coffee dispensing is too fast with your Expobar Coffee Maker, the coffee grind may be too coarse. Switch to a finer grind of espresso.
How to unclog steam wand on Expobar Diamant Pro?
If the steam wand on your Expobar Coffee Maker isn't dispensing steam, it might be clogged with dried milk. Clean the wand, and if needed, remove the nozzle and use a pin or needle to unclog it.
Why is there water under my Expobar Diamant Pro Coffee Maker?
If you find water underneath your Expobar Coffee Maker, it's possible that the drain tube is blocked with used grounds or rubbish, or it has become disconnected from the drain cup. Clean the drainage tube to resolve this issue.
Why is my Expobar Diamant Pro Coffee Maker dispensing coffee too cold?
If the coffee dispensing temperature is too cold on your Expobar Coffee Maker, the heat-exchanger outlet pipes may be clogged with limescale. Turn off the machine and contact a technician for repairs.
What to do if brewing groups do not dispensing water in Expobar Coffee Maker?
If the brewing groups on your Expobar Coffee Maker are not dispensing water, the water system may be clogged with limescale. Turn off the machine and contact a technician for necessary repairs.
General| Brand | Expobar |
|---|---|
| Model | Diamant Pro |
| Category | Coffee Maker |
| Language | English |
To Next Page
