DIAMANT Pro
12
SERVICE PROGRAMMING: USER SETTINGS
Display language selection
To change the machine’s operating language follow the steps below:
1. From the normal screen press top left icon ( ) area for 3s.
2. In the off screen press top right area ( ) and enter “User settings” (password : 333)
3. In the option “Select language”, press to go next option and to go previous option.
Setting will be saved when pressed the icon and text is white.
4. If you want to go to main screen again press .
Programming the (Name) publicity message
To change the machine’s display’s welcome/publicity message follow the steps below:
1. Enter the ‘User setting’ menu.
2. When ‘Machine name’ is shown on the display, press to go next character and to go
previous character, with the icon you forward one letter. Setting will be saved when
pressed the icon and text is white.
3. If you want to go to main screen again press .
Set keypad mode (traditional or barista)
To change the keypad mode follow the steps below:
1. Enter the ‘User setting’ menu.
2. When ‘Select keypad mode’ is shown on the display, press to go next option and to
go previous option. Setting will be saved when pressed the icon and text is white.
- Traditional: Gives user the ability to brew pressing from K1 to K5.
- Barista: Gives user the ability rst to select the dose then brew. Also having ability to ush
the group pressing twice.
3. If you want to go to main screen again press .
Display chrono settings
To change the brewing chrono settings follow the steps below:
1. Enter the ‘User setting’ menu.
2. When ‘Chrono’ is shown on the display, press to go next option and to go previous
option. Setting will be saved when pressed the icon and text is white.
- Timer: Displays timer in seconds when brewing.
- Disabled: Shows empty display when brewing.
3. If you want to go to main screen again press .
To Next Page
Loading...
