DIAMANT Pro
14
SERVICE PROGRAMMING: USER SETTINGS
Enabling/disabling grinding warning alerts
To enable or disable the coffee grind warning option follow the steps below:
1. Enter the ‘User setting’ menu.
2. When ‘Grinder alert’ is shown on the display, press to go next option and to go
previous option. Setting will be saved when pressed the icon and text is white.
- Enabled: Shows the grinding alerts if ‘too ne’ or ‘too coarse’ triggers are achieved.
- Disabled: Don’t show grinding alerts.
3. If you want to go to main screen again press .
Adjusting triggers for grinding alerts
With the ‘Grinder alert’ enable, adjust the triggers for grinding alerts follow the steps below:
1. Enter the ‘User setting’ menu.
2. When ‘Grinder too ne alert’ is shown on the display, press to increase value (in ml/s)
and to decrease value (in ml/s). Setting will be saved when pressed the icon and text
is white.
3. Repeat for ‘Grind too coarse alert’.
4. If you want to go to main screen again press .
Change Barista menu password
To change the password to access to the barista menu follow the steps below:
1. Enter the ‘Barista password’ menu.
2. When ‘Change password’ is shown on the display, press to increase value and to
decrease value. Setting will be saved when pressed the icon and text is white.
3. Repeat for each entry.
4. If you want to go to main screen again press .
Change user settings password
To change the password to access the user settings programming menu follow the steps below:
1. Enter the ‘User setting’ menu.
2. When ‘Change password’ is shown on the display, press to go next character and to
go previous character, with the icon you forward one letter. Setting will be saved when
pressed the icon and text is white.
3. If restored, the password will be reset to 333 as default.
4. If you want to go to main screen again press .
To Next Page
Loading...
