Expobar Diamant Pro - Boiler Pressure and Temperature Information

DIAMANT Pro
18
Adjusting the boiler heating priority
To change the boiler heating priority follow the steps below:
1. Enter the ‘Technician setting’ menu.
2. When ‘Heating priority’ is shown on the display, press to go next option and to go
previous option. Setting will be saved when pressed the icon and text is white.
- Steam (As default): Steam boiler will be at temperature set before the group boilers start
heating.
- Coffee: Coffee boilers will be at temperature set before the steam boiler starts heating.
- Toggle Steam / Coffee: Machine will heat up each heating element 2s (2 seconds steam boiler,
2 seconds group boilers).
3. If you want to go to main screen again press .
SERVICE PROGRAMMING: TECHNICIAN SETT.
Adjusting the dispensing offset temperature differential
To change the machine’s dispensing temperature differential (the difference in temperature between the
group boiler and group brewing head) for all groups follow the steps below:
1. Enter the ‘Technician setting’ menu.
2. When ‘Group temp offset’ is shown on the display, press to increase value and
to decrease value. Setting will be saved when pressed the icon and text is white.
3. If you want to go to main screen again press .
Enabling/disabling SmartSteam
To enable or disable the SmartSteam option follow the steps below:
1. Enter the ‘User setting’ menu.
2. When ‘SmartSteam’ is shown on the display, press to go next option and to go
previous option. Setting will be saved when pressed the icon and text is white.
- Enabled: Enable all functionality related with the SmartSteam.
- Disabled: Disable all functionality related with the SmartSteam and hides icon from barista
menu.
3. If you want to go to main screen again press .
Enabling/disabling E-cup heater
To enable or disable the E-cup heater option follow the steps below:
1. Enter the ‘User setting’ menu.
2. When ‘E-cup heater menu’ is shown on the display, press to go next option and to go
previous option. Setting will be saved when pressed the icon and text is white.
- Enabled: Enable all functionality related with the E-cup heater menu.
- Disabled: Disable all functionality related with the E-cup heater menu and hides icon from
barista menu.
3. If you want to go to main screen again press .