Expobar Diamant Pro - Technical Specifications; Diamant Pro 2 GR Machine Data

DIAMANT Pro
10
SERVICE PROGRAMMING: GENERAL
Entering Barista menu
To access the Barista menu, follow the steps below:
1. From the normal screen press top right icon ( ) area for 3s.
2. Here you will see all the settings available for barista. Some of these are disabled by default and
have to be enabled from the User / Technician settings.
Entering technical menus (user, technician & factory)
To access the service programming menus, follow the steps below:
1. From the normal screen press top left icon ( ) area for 3s.
2. In the off screen press top right area ( ).
3. Here you can select if you want to go to the user settings, technician settings or factory (depends
of the setting you want to change or access):
- If you pressed “User settings”, enter password “333” to access User settings
- If you pressed “Technician settings”, enter password “666” to access Technician settings
- If you pressed “Factory settings”, enter password “999” to access Factory settings.
4. In the different menus, press to go next setting and press to go previous setting
Note:
You will nd the barista menu programming instructions on the User Manual.
i