ZIRCON
33
After accepting the changes made in the "Set clock" menu, pressing the 2
Short Espressos button accesses the coffee machine's Auto On/Off
programming menu (see g. 09).
To change the Auto On/Off time, increase/decrease the values (hours)
using the 1 Short Espresso and 1 Long Espresso buttons
whilst the values are ashing. When the desired value is reached, press
the 2 Short Espressos button to accept it. Set the values for the
minutes in the same way( , and ).
To access the counters menu, go to the start of the second menu level
(see g. 07).
Briey press the Continuous Dispensing button to display the
"Counters" option (see g. 12).
The machine has the following 4 counters:
Litres: Volume of water dispensed by the machine (indicator used for
descaler maintenance cycles).
Service: Number of coffees dispensed (indicator used for servicing).
Number of coffees/infusions dispensed.
Number of coffees dispensed per button.
Note:
By default, this setting is set as: On: --------- (indicating that the function is disabled).
Changing the value to anything other than --------- enables the function. To leave this function
disabled, press the 2 Short Espressos button
whilst the value selected is ---------.
Note:
By default, this setting is set as: On: - - : - - (indicating that the function is disabled).
Changing the value to anything other than - - : - - enables the function. To leave this function
disabled, press the 2 Short Espressos button whilst the value selected is - - : - -.
Whilst the Auto Off time is ashing, increase/decrease the values by
pressing the 1 Short Espresso and 1 Long Espresso buttons.
When the desired value is reached, press the 2 Short Espressos button
to accept it.
The minutes values will start ashing. Set these values in the same way as
described above (
, , and ). After accepting the time,
the next menu will be displayed.
If Auto On/Off is enabled, it will also be possible to set a day on which
the machine will not be turned on automatically. This option will not be
displayed if Auto On/Off is disabled.
To set the day off (see g. 11), increase/decrease the values by pressing the
1 Short Espresso and 1 Long Espresso buttons. When the
desired value is reached, press the 2 Short Espressos button to
accept it.
Auto On/Off
Counters
PROGRAMMING USING THE DISPLAY
g. 12
Counters
g. 9
Auto On/Off
On: hh.mm
g. 10
g. 11
Closed On
Day
Auto On/Off
Off: hh.mm
i
i