Expressive SAS Expressive E Touche - 2.4.2. Data

2.4.2. Data
Input
Touché has two sources of MIDI inputs :
All datas received in MIDI IN or USB IN are sent to both MIDI Out ( MIDI Merge ) and USB out.
Output
When Touché is in Slave mode, its USB output always sends the following CCs to control Lié :
•
Top shiing : CC 17
•
Bottom shiing : CC 16
•
Le shiing : CC 18
•
Right shiing : CC 19
MIDI and CV outputs sends data according to the selected Hardware Preset within Lié. Please refer to the
Hardware Preset section to learn how to set up the MIDI and CV outputs of Touché in a Hardware Preset.
When Touché is in Standalone mode, its MIDI, USB and CV outputs send data according to the selected preset in the
memory. Please refer to the Memory View section to learn how to save presets in Touché’s internal memory.
Expressive E
Touché User Manual v.1.1
Page of 11 29