3.2.7. Memory View
The Memory View allows you to save Hardware Presets in Touché, so you can use Touché with your gear in
Standalone mode, without a computer.
Click on “MEMORY VIEW” button in the Menu to open it.
You can see 24 different slots, sorted in 6 banks. Each bank has its own colour, and the number of dots represent the
preset number. When in Standalone mode, Touché’s LEDs will have a colour corresponding to the currently
selected bank, and the number of LEDs lit will represent the number of the preset.
You can store a preset in each slot. To save a preset in Memory View, first click on one slot (it will turn to white) and
double click on a Hardware Preset in the Browser. The preset is now displayed inside the slot. A click on the
cancelling cross next to the slot will restore the default preset. A click on “Delete All” will the restore the default
preset in all slots.
Once you’re done, click on “SAVE IN TOUCHE” to save those presets in Touché’s internal memory. Do not disconnect
Touché before the end of the loading process.
If a preset already saved in Touché’s internal memory has the same name, but different settings than a preset from
the Browser, and you want to use this preset instead of the one already saved in Touché’s internal memory, you
must delete the old one and save the new one.
To Next Page
Loading...
Need help?
General