Extra 300/SC - Page 214

CHAPTER 28
PAGE 20
MAINTENANCE MANUAL EXTRA 300/SC
PAGE DATE: 16. June 2008
MAINTENANCE PRACTICES
6 Remove the control handle attachment bolt (7).
7 Remove the washers (8) and spring (9) if installed, the con-
trol rod (6) and the control handle (10).
8 Install in reverse sequence of removal. Use LOCTITE when
installing the attachment bolts of the new type selector valve.
28-20-02 Gascolator
Removal/Installation
1 Position the fuel selector to "OFF".
2 Drain the forward fuel system using the gascolator drain.
3 Disconnect the fuel lines on the gascolator.
4 Loosen the knurled nut (1).
5 Remove the mounting bracket (2).
6 Remove the fuel reservoir (3) and the sealing ring (4).
7 Remove the strainer (5) and the gascolator cover (6).
8 Install in reverse sequence of removal.