SET CLOCK
Setting the clock allows to adjust the time and date
SET LANGUAGE
It enables the user to select one of the available languages. Italian - English - French - German - Spanish
COMMISSIONING SETTINGS
Once the power cable at the back of the generator has been connected, move the switch, located on the back, to position (I).
The switch at the back of the generator powers the generator board.
The generator stays o and the panel shows an initial screen with the word OFF.
MAINS FREQUENCY 50/ 60HZ
In the event the generator is installed in a country with 60Hz frequency, the generator will display "wrong mains frequency". Change in the
frequency to 60Hz.
17
To Next Page
Loading...
