Extraflame HP 22 - Displays

ENGLISH
Displays
Display Reason
off
Stove o
sTaRT
The start-up phase is in progress
pelleT feeDinG
Continuous pellet feeding is in progress during the ignition phase
iGniTion
The ignition phase is in progress
sTaRT-up
The start-up phase is in progress
WoRk
The normal work phase is in progress
MoDulaTion
The stove is working at minimum
BuRn poT
cleaninG
Automatic burn pot cleaning is in progress
final cleaninG
The nal cleaning is in progress
sTanD-By
Stove o waiting for re-ignition due to an external thermostat
sTanD-By
coolinG
A new ignition is attempted when the stove has just been switched o. When the stove switches o, one
must wait for the complete shutdown of the fumes motor, then clean the burn pot. The stove can only be
re-ignited when these operations have been performed.
Hoff
Stove o due to water temperature over set
T - off
Stove o waiting for re-ignition as all the requests have been satised
sTanD-By
Black ouT
The stove is cooling after a power cut.
Once cooling is completed it will re-start automatically
anTi-fReeze
The anti-freeze function is in progress as the H2O t° is below the factory set threshold
the pump is active until the water reaches the pre-set factory parameter +2°C
anTilock
The pump antilock function is in progress (only if the stove has been in an OFF state for at least 96 hours);
the pump is activated for the time pre-set by the manufacturer, in order to prevent it from blocking
auTo BloW
The automatic blow is active
28