Installing BlackDiamond 8800 Series Module Options
BlackDiamond 8800 Series Switches Hardware Installation Guide
128
Figure 80: Daughter Card Connectors on the BlackDiamond G48Tc, G48Te2, or 8500-G48T-e
I/O Module
4 Remove the S-POE card from its anti-static packaging.
5 Align the S-POE card with the connectors on the I/O module (see Figure 82). Following the sequence
indicated in Figure 82, carefully press the connectors into place. Make sure that all the connectors
seat securely.
Figure 81: Seating the S-POE Card on the I/O Module
Daughter
card connectors
Daughter
card connectors
12 2
3
3
1
To Next Page
Loading...
