Extreme Networks BlackDiamond 8806 - Rack-Mounting the Blackdiamond 8800 Series Chassis

Installing the BlackDiamond 8800 Series Chassis
BlackDiamond 8800 Series Switches Hardware Installation Guide
90
Figure 54: Attaching the Mid-mount Brackets to the BlackDiamond 8810 Chassis
Rack-Mounting the BlackDiamond 8800 Series Chassis
To mount the BlackDiamond 8800 series chassis in a rack:
1 Locate the 19-inch support bracket that is shipped with the BlackDiamond 8800 series chassis.
2 Identify the rack location where the chassis will be installed.
3 Using four rack mounting screws, attach the support bracket to the system rack immediately below
the chassis location (see Figure 55).
You must provide the screws for attaching the support bracket.
ASP034
Mid-Mount
Bracket