Extreme Networks BlackDiamond 8806 - 10 G4 Xc I;O Module

BlackDiamond 8000 Series Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide
38
10G4Xc I/O Module
The 10G4Xc I/O module (Figure 21) has four unpopulated XFP-based 10-gigabit Ethernet ports.
Figure 21: 10G4Xc I/O Module
In the default configuration of the 10G4Xc I/O module, all ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 10G4Xc I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the 10G4Xc I/O module, see “I/O Module LEDs”
on page 50.
10G4Xc
10 G 4 Xc
10GBASE-X XFP
41614
Module status LEDs
10 Gbs ports
BD_155