BlackDiamond 8800 Series Switches Hardware Installation Guide
19
2 BlackDiamond 8000 Series Modules
This chapter describes modules for the BlackDiamond 8800 series switches and includes the following
sections:
● Overview of the BlackDiamond 8000 Series Modules on page 19
● Management Switch Modules (MSM) on page 21
● I/O Modules on page 25
Overview of the BlackDiamond 8000 Series Modules
Modules available for the BlackDiamond 8800 series switches include management switch modules
(MSMs) and I/O modules. A BlackDiamond module consists of a printed circuit board mounted on a
metal panel that acts as the insertion vehicle in the BlackDiamond 8800 series switches. The module
carrier also includes ejector/injector levers and captive retaining screws at each end of the module front
panel. LEDs on the module front panel provide information about the operating status of the modules.
The BlackDiamond 8800 series switches support the modules listed in Table 3 and Table 4.
Table 3: MSMs for the BlackDiamond 8800 Series Switches
8500 Series 8800 Series 8900 Series
Currently Available
Models
8500-MSM24 MSM-48c 8900-MSM128
Legacy Models
MSM-G8X
MSM-48
Table 4: I/O Modules for the BlackDiamond 8800 Series Switches
8500 Series 8800 e Series 8800 c Series 8900 Series
Currently
Available
Models
8500-G24X-e G48Te2 G48Tc 8900-10G24X-c
8500-G48T-e G48Xc 8900-G96T-c
G24Xc 8900-G48T-xl
10G4Xc 8900-10G8X-xl
10G8Xc 8900-G48X-xl
8800 Original
Series
8800 a series 8800 e Series
Legacy
Modules
G24X G48Ta G48Te
G48T G48Xa G48Pe
G48P 10G4Xa
10G4X 10G4Ca
To Next Page
Loading...
