BlackDiamond 8800 Series Switches Hardware Installation Guide
147
2 Slide the ends together and push the cable holders together until you feel them snap into place (see
Figure 106).
Figure 106: Connected Cable Holders
3 Connect as many cable holders together as you need to manage your cable bundles.
4 To disconnect the holders, grasp one in each hand firmly and carefully pull them apart.
Connecting Cable Clips
To connect the cable clips:
1 Hold two clips next to each other with the split sides facing the same way (see Figure 107).
2 Slide the connecting grooves together (see Figure 107).
Figure 107: Connecting Cable Clips
ENIN004
ENIN001A
To Next Page
Loading...
