BlackDiamond 8800 Series Switches Hardware Installation Guide
181
B Technical Specifications
This appendix includes the following technical specifications:
● BlackDiamond 8810 Switch on page 181
● BlackDiamond 8806 Switch on page 183
● Modules for BlackDiamond 8800 Series Switches on page 185
● Power Supplies for BlackDiamond 8800 Series Switches on page 188
● Connector Pinouts on page 189
BlackDiamond 8810 Switch
Table 22: BlackDiamond 8810 Switch Technical Specifications
Physical Characteristics
BlackDiamond 8810 chassis Height: 24.47 inches (62.2 cm)
Width: 17.51 inches (44.5 cm)
Depth: 18.23 inches (46.3 cm)
Weight (empty): 79 lb (35.8 kg)
Weight (fully loaded): 196 lb (88.9 kg)
BlackDiamond 8810 fan tray Weight: 6.75 lb (3.06 kg)
Minimum fan speed: 500 RPM
Maximum fan speed: 6000 RPM
Power supply Weight: 7 lb (3.2 kg)
BlackDiamond 8810 PSU/fan
controller
Weight: 1.75 lb (.79 kg)
Safety Standards
North American Safety of ITE UL 60950-1:2003 1st Ed., Listed Device (US)
CSA 22.2#60950-1-03 1st Ed.(Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
NOM/NYCE (Mexico)
IEEE 802.3af 6-2003 Environment A for PoE Applications
European Safety of ITE EN 60950-1:2001+A11
EN 60825-1+A2:2001 (Lasers Safety)
TUV-R GS Mark by German Notified Body
73/23/EEC Low Voltage Directive
International Safety of ITE
CB Report & Certificate per IEC 60950-1:2001 Country Deviations
AS/NZX 60950-1(Australia /New Zealand)
To Next Page
Loading...
