•
The power cord must have an appropriately rated and approved wall plug applicable to the country
of installation.
•
For cords up to 6 feet (2 m) long, the wire size must be 18 AWG (.75 mm
2
) minimum; over 6 feet, the
minimum wire size is 16 AWG (1.0 mm
2
).
The power cords for switches that use either the 1100 W or 715 W power supplies are keyed with a
“notch” to ensure the proper orientation when plugged in. These cords are of 3x14 AWG.
You can purchase AC power cords for use in the US and Canada from Extreme Networks or from your
local supplier.
Technical Specifications
ExtremeSwitching 210 and 220 Series Switches: Hardware Installation Guide 78
To Next Page
Loading...
