Extron electronics DTP CrossPoint 108 4K - Page 34

DTP CrossPoint 4K Series Matrix Switchers • Operation 26
NOTE: See Front Panel Operations, beginning on page 29 for detailed descriptions of
the following operations.
F
View (
<
) button (see figure 18 on page 22)— The View (
<
) button has one primary
function (❏) and five secondary functions (•):
❏ Select and indicate View-only mode, which displays the current configuration.
• With the Esc button, indicates Input Audio Configuration mode.
• With the Enter, Preset, and Esc buttons, selects Serial Port Configuration
mode.
• Selects 38400 baud for the rear panel Remote port in Serial Port Configuration
mode, and indicates the selections.
• With the Preset button and Esc button, selects between front panel locks (Lock
mode 2 and Lock mode 0).
• With the Esc button, selects between front panel locks (Lock mode 2 and Lock
mode 1).
G
Esc (
>
) button (see figure 18)— The Esc (
>
) button has one primary function (❏) and
five secondary functions (•):
❏ Cancels operations or selections in progress and resets the front panel button
indicators and blinks once to indicate that the escape function has been activated.
• With the View button, indicates Input Audio Configuration mode.
• With the Enter, Preset, and View buttons, selects Serial Port Configuration
mode.
• Selects 115200 baud for the rear panel Remote port in Serial Port Configuration
mode and indicates the selection.
• With the Preset button and View button, selects between front panel locks
(Lock mode 2 and Lock mode 0).
• With the View button, selects between front panel locks (Lock mode 2 and
Lock mode 1).