SW HD 4K PLUS Series • Internal Web Page 38
Internal Web Page
This section provides procedures for accessing and using the SW HD 4K PLUS series
internal web page. Topics in this section include:
• Accessing the Web Page
• Web Page Overview
The internal web page displays information about the device and provides basic
configuration options. For more detailed configuration options, use SIS commands or the
Extron Configuration Product Configuration software (PCS) (see Remote Configuration
and Control, beginning on page 18, or the PCS help file).
Accessing the Web Page
To access the internal web page:
1. Connect the switcher to a LAN or WAN using the rear panel LAN connector (see
F
LAN (Ethernet) connector on page 6).
NOTE: If the Ethernet connection to the switcher is unstable, try turning off the
proxy server in the web browser.
2. On a connected PC, open a web browser.
NOTE: The internal web page does not support compatibility mode in Microsoft
Internet Explorer
®
.
3. Enter the IP address of the device in the browser Address field.
NOTE: The default IP address is 192.168.254.254.
4. Press the <Enter> key on the keyboard.
5. The switcher checks if the device is password-protected and performs one of the
following:
• If the device is not password-protected, the web page opens.
• If the device is password-protected, enter a user name (user or admin) in the User
Name field and the password in the Password field when prompted.
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. In the event of an absolute system reset, the
passwords convert to the default, which is no password.
6. Click the OK button.
To Next Page
Loading...
