Extron electronics SW HD 4K PLUS Series - Starting PCS

SW HD 4K PLUS Series • Remote Configuration and Control 37
Starting PCS
Start PCS as follows:
1. Click Start > Programs > Extron Electronics > Extron Product Configuration
Software > Extron Product Configuration Software. The Product Configuration
Software opens with the Device Discovery window (see figure20).
Figure 20. Device Discovery Window
2. Select a device (one of the switchers in the SW HD 4K PLUS series) on the network or
the USB port (see figure20,
1
)
3. Click Connect (
2
).
The Product Configuration Software opens with the Input/Output Configuration
window (see figure21).
Figure 21. Input/Output Configuration Window
20
21