Extron electronics SW HD 4K PLUS Series - Firmware Update via Web

SW HD 4K PLUS Series • Internal Web Page 41
Firmware update
NOTE: If necessary, download firmware updates from www.extron.com (see
Downloading the SW HD 4K PLUS Firmware on page 32 for instructions).
To update the firmware,
To update the firmware:
1. Click the Update button in the Device Info panel. The Firmware Update dialog box
opens.
2. Click the Browse button. An Open dialog box opens.
3. Navigate to the location of the firmware file. Valid firmware files have an .eff extension.
4. Select the file and click the Open button. The Open dialog box closes, and the path to
the firmware file is displayed in the Firmware field.
Figure 25. Firmware Update Dialog Box
5. Click the Upload button. The firmware file begins to upload to the switcher. When the
upload is complete, the Firmware Update dialog box closes.
To cancel pending changes:
Click the Cancel button. The dialog box closes.
Date/Time Settings Panel
The Date/Time Settings panel (see figure22,
3
, on page 39) displays the date and
time on the device and provides options to set the device date and time automatically or
manually.
Automatic date and time update
This method sets the device date and time to the same date and time of the PC. To do this,
click the Sync to PC button (see figure 26,
1
) in the Date/Time Settings panel.
Figure 26. Setting Automatic Date and Time Update
25
26