Extron electronics SW HD 4K PLUS Series - Page 50

SW HD 4K PLUS Series • Internal Web Page 42
Manual date and time update
With this method, each value of the date and time must be set. To edit the date and time
manually, click the Set Manually button in the Date/Time Settings panel. The Date and
Time Settings dialog box opens.
Figure 27. Date and Time Settings Dialog Box
To set the date and time:
1. Set the date by one of the following methods:
• Click the Today button to set the date to the current date on the PC (see figure 27,
1
).
• Select the date from the calendar by doing either of the following:
• Click the left and right arrow buttons in the calendar header bar (
2
).
• Click the down arrow next to the calendar month
and year (
3
) to display the date drop-down menu.
Click the desired month and year.
To display additional years, click the right and
left arrows at the top of the menu (see
1
in the
illustration at right). Click the OK button to accept
the selected settings or the Cancel button to
cancel pending selections.
2. To set the time, click the up and down arrow buttons for
each field to set the hours, minutes, seconds, and AM or PM
as desired.
3. Select the time zone from the Time Zone drop-down menu.
4. Click the Apply button. The dialog box closes.
To cancel pending changes:
Click the Cancel button. The dialog box closes.
27