SW HD 4K PLUS Series • Internal Web Page 43
Configure This Device Panel
This panel enables you to download PCS which enables you to configure the
SW HD 4K PLUS series switcher. Click the http://www.extron.com/download/ link to
open the Download page of the Extron website (see Downloading and Installing PCS on
page 34 for further instruction).
Passwords Panel
NOTE: The factory configured passwords for all accounts on this device have been set
to the device serial number. In the event of an absolute system reset, the passwords
convert ot the default, which is no password.
The Passwords panel (see figure22,
5
on page 39) provides an option to set
administrator or user passwords. To assign passwords, click the Set button in the
Passwords panel. The Passwords dialog box opens.
Figure 28. Passwords Dialog Box
To assign an administrator password:
1. In the Administrator Password field, enter the new password.
2. In the Confirm Password field directly under the Administrator Password field, enter
the same password from the field above.
3. Click the Apply button. The dialog box closes.
To assign a user password:
1. Ensure an administrator password is assigned.
2. In the User Password field, enter the new password.
3. In the Confirm Password field directly under the User Password field, enter the same
password from the field above.
4. Click the Apply button. The dialog box closes.
To remove a password:
1. In either the Administrator Password or User Password field, delete any existing
password, leaving the field blank.
2. In the corresponding Confirm Password field, press the <Space> key.
3. Click the Apply button. The dialog box closes.
To cancel pending changes:
Click the Cancel button. The dialog box closes.
28
To Next Page
Loading...
