F.u.n.k.e. ATR833A-OLED - Mounting Advices

ATR833A / P/N 833A-(xxx)-(1xx)
Operation and Installation
41 Dokument-Nr.: 01.1411.010.71e / Revision: 3.00
4.12.2 Mounting Advices
Panel cut-out: 160 x 42 mm, horizontal aligned, in viewable and
reachable position to the pilot
Use the standard mounting blocks of Mounting Block Set MB833AS
(included in delivery).
For mounting in panels with a thickness of 3 mm to 5 mm longer screws
are required. Order no.: ZUB1.
158 mm
40
17
170
30
11
direct panel mounting
Befestigung direkt am Panel
(Mounting-Block-Set MB800AS)
148
MB800A2