EasyManua.ls Logo

F.u.n.k.e. ATR833A-OLED - Page 45

F.u.n.k.e. ATR833A-OLED
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ATR833A / P/N 833A-(xxx)-(1xx)
Operation and Installation
44
Dokument-Nr.: 01.1411.010.71e / Revision: 3.00
TRANSMITTER
POWER OUTPUT
6 W (nominal)
4 W (minimal)
HARMONIC DISTORTION < 10 % bei 70 % modulation
SIDETONE OUTPUT >0,5W into 300 (per headphone)
MICROPHONE INPUTS
2 x standard (50mV…2V) into 100
2 x dynamic microphone
HARMONIC CONTENT >60dBc
MODULATIONFIDELITY deviation <6dB (350…2500Hz)
CARRIER NOISE LEVEL >35dB at 70% modulation
UNWANTED FREQUENCY-
MODULATION
<1kHz at m=70% / 1kHz
DUTY CYCLE
2 minutes on, 4 minutes off;
automatic turn-off after 2 minutes of
continuous transmit operation
RECEIVER
SENSITIVITY
-105 dBm (>6dB S+N/N,
m = 30 % /1 kHz)
BANDWIDTH / 25 KHZ -6-dB-bandwidth > ±8.0 kHz
BANDWIDTH / 8.33 KHZ -6-dB- bandwidth > ±2.78 kHz
SELECTIVITY
(channel spacing 25 KHZ)
-40-dB- bandwidth < ±17.0 kHz
-60-dB- bandwidth < ±22.0 kHz
SELECTIVITY
(channel spacing 8.33 KHZ)
-60-dB- bandwidth < ±7.37 kHz
SPEAKER-OUTPUT 4 W into 4 (speaker output)
AGC CHARACTERISTICS
AF output deviation < 6 dB
from 10 µV to 10 mV
SQUELCH Automatic Squelch (adjustable)
SPURIOUS RESPONSES > 80 dB
DISTORTION (350…2500Hz)
<25% at rated power (85% / -33dBm)
<10% at 10dB below rated power (70%
/ -33dBm)

Table of Contents

Related product manuals