Need help?Do you have a question about the F.u.n.k.e. TRT800H-OLED and is the answer not in the manual?
General| Brand | F.u.n.k.e. |
|---|---|
| Model | TRT800H-OLED |
| Category | Marine Radio |
| Language | English |
Version with OLED-Display and one VFR-Code.
Version with OLED-Display, VFR-Code, and remote control interface.
Explains symbols used for safety and information in the manual.
Lists abbreviations and their meanings used throughout the document.
Provides contact details and suggestions for manual improvements.
Details the key features and functionalities of the transponder.
Lists FAA deviations and critical notes regarding certification and usage.
Identifies and explains the front panel controls and buttons of the transponder.
Procedure for powering the transponder on/off and the initial display information.
Explains the meaning of various symbols, codes, and data shown on the transponder display.
Instructions on how to adjust the display brightness of the transponder.
Steps to display and configure the Flight Identification (FID) for Mode S operation.
How to select different operational modes (STBY, ACS, A-S) for the transponder.
Procedures for setting squawk codes and activating the VFR Squawk function.
How to activate SPI and refer to error codes for troubleshooting operational issues.
Important installation suggestions and telecommunication data requirements for licensing.
Lists the items included in the transponder package for installation.
Guidance on unpacking, inspecting, and physically mounting the transponder unit.
Details the electrical connections for the transponder unit, including the D-SUB connector.
Configuration for Auto-On functionality and connection of the static air port.
Guidelines for wiring and specifications for conductor cross-sections for power and signals.
Details the pin assignments for the transponder's 15-pin D-SUB connector.
Wiring diagrams for various external memory adapter versions (EM800, EMRSS, EMSS).
Recommendations for selecting, installing, and wiring the aircraft antenna.
Procedures for verifying operation and powering up the transponder.
Lists available accessories and part numbers for the transponder system.
Physical dimensions and detailed advice for mounting the transponder in an aircraft panel.
Summary of configurable information and user-related settings stored by the transponder.
How to access and view a summary of current transponder settings.
Configuration of aircraft address, category, and flight ID for Mode S.
Speed category, ground switch, remote header, and serial interface configurations.
Procedure for adjusting altitude readings for accuracy with cockpit altimeters.
How to navigate and perform setup procedures using the transponder menu.
Structure and handling of transponder configuration records, including multiple presets.
How to configure general transponder settings like Ground Switch and GPS interface.
Lists detailed technical specifications and compliance data for the transponder.
Details environmental conditions the transponder meets according to DO-160D standards.
States that there are no open problem reports for the device software.
To Next Page