TRT800H / P/N 800ATC-H-(2xx)-(2xx)
Operation and Installation
Document-No: 03.2124.010.71e / Revision: 2.10
1.5 Deviations and Important Notes
The following deviations have been granted by the FAA:
The device is certified to FAA TSO-C112c in lieu of FAA
TSO-C112d.
Environmental Qualification Testing was performed
according to RTCA/DO-160D in lieu of RTCA/DO-160F.
The Software of this device was developed according to
RTCA DO-178B Design Assurance Level "D".
The ADS-B function of this device has not been evaluated
during the FAA TSO certification process other than to
ensure non-interference. Due to the SW assurance of DAL
"D", the ADS-B function cannot be used in the US National
Airspace.
Connecting a GPS source will not comply to FAA
certification requirements with regard to ADS-B.
This device contains an altitude measuring device that has
not been evaluated during the FAA TSO certification
process other than to ensure non-interference.
This feature must be evaluated for intended function
during FAA installation approval.
Compliance to RTCA DO-181D was verified by testing
against EUROCAE ED-73C. The two standards are
technically identical with regard to the TRT800H.
To Next Page
Loading...