F.u.n.k.e. TRT800H-OLED - Display Indications

TRT800H / P/N 800ATC-H-(2xx)-(2xx)
Operation and Installation
12
Document-No: 03.2124.010.71e / Revision: 2.10
2.3 Display - Indications
Value
Meaning
Remarks
7000
active Squawk
2000
Standby Squawk
Could be changed with active
Squawk by pressing ▲▼
FL 030
FLerr
Flight Level
Invalid altitude measuring
Flight Level (in 100 ft steps)
Beyond -1000 ... 35 000 ft,
C Mode gets inactive
ACS
Operational Mode
(STBY, A-S, ACS, AC, A)
Modes see section 2.6
IDT
transmits Ident-Marking (SPI)
ID („Squawk Ident“) has been
pressed – active for 18 s

Transponder replies
on Mode-S, Mode-A or Mode-
C interrogations
No indication on ADSB and
squitter transmission
|
Transponder is locked by a
ground station and will be
directly addressed
Lock Information (indicated
below the diamond)
F
G
in-flight
on-ground
Ground-Switch-Info
(if installed/available)
ACS

7000
TM
PLL/TRX/
DC
|
BAT/DIM
IDT
FL 030
STBY
2000
F
Passive
Squawk
Active Squawk
Test mode
indicatior
GND switch
status
Operational Mode:
Standby
SPI indicator
Error
indications
Reply
indication
Lock out
indication
Flight level
Backlight setup
Low battery ind.
Operational Mode:
Active