AC OR DC MEASUREMENT SELECTION
To toggle between AC and DC Mode, press on the home screen ——————————————————— or
Alternatively, press ————————————————————————————————————————————————
To navigate to setting page 1, press ———————————————————————————————— or
To toggle AC/DC modes, press ———————————————————————————————
To return to normal operation, press —————————————————————————————————————
The meter is capable of measuring either static (DC) or alternating (AC) magnetic fields. The meter will display “AC” on the home screen
AC/DC button when in AC mode. The meter will display “DC” on the home screen AC/DC button when in DC mode. The DC and AC mode is
discussed in more detail later in this section. This setting is saved and will be restored the next time the meter is turned on.
UNITS OF MEASUREMENT SELECTION
To toggle between units, press and hold on the home screen ————————————————————————————
Alternatively, press ————————————————————————————————————————————————
To navigate to setting page 1, press ———————————————————————————————— or
To toggle Units modes, press ————————————————————————————————
To return to normal operation, press —————————————————————————————————————
The meter is capable of providing flux density measurements in terms of gauss (G), tesla (T) or ampere/meters (A/m). This setting is saved
and will be restored the next time the meter is turned on.
To Next Page
Loading...
Need help?
General
