F.W. Bell 5280 - Manual Zero Function

MANUAL ZERO FUNCTION
To select MANUAL ZERO from the ZERO settings page, press and hold on the home screen ———————————————
Alternatively, press ————————————————————————————————————————————————
To navigate to setting page 2, press ————————————————————————————————— or
To enter the ZERO settings page, press ————————————————————————————
To select MANUAL ZERO in settings page, press until button displays MANUAL ————————————————————
To select manual value as the ZERO point, navigate digits with arrows —————————————————
And use these arrows to change the values or use RESET to clear the offset ——————————————
To return to normal operation, press —————————————————————————————————————
Then, press ————————————————————————————————————————————————
To keep previous settings, press ——————————————————————————————————————————
When in MANUAL ZERO mode, the meter can be re-zeroed by pressing ————————————————————————
Figure 3-17
Zero Manual Settings Page
3-20