Need help?Do you have a question about the F5 Viprion and is the answer not in the manual?
Details the primary components of the VIPRION platform: chassis and blades.
Outlines the initial tasks for setting up the VIPRION platform.
Provides general information on installing the VIPRION chassis and related steps.
Details compatibility between PB100 and PB200 blades in mixed clusters and software versions.
Covers managing clusters and blades via the LCD panel, including IP configuration.
Provides step-by-step instructions for installing and removing blades.
Explains how to add or replace power supplies in the VIPRION chassis.
Lists technical specifications for the PB100 blade.
Lists technical specifications for the PB200 blade.
General| Model | Viprion |
|---|---|
| Category | Chassis |
| Redundancy | Yes |
| Slots | 4 |
| Number of Blades Supported | 4 |
| Max Throughput | 1.2 Tbps |
| Power Supply | Redundant, hot-swappable |
| Cooling | Redundant cooling fans |
| Management | Web-based, CLI |
| Form Factor | Rackmount |
To Next Page
