F5 Viprion - VIPRION PB100 Blade Specifications

Chapter 9
9 - 4
PB100 blade specifications
The following specifications apply to the PB100 blade only.
WARNING
This platform supports only optics modules provided by F5 Networks.
Important
The XFP ports on this blade are inverted. Insert XFP optics upside down.
Important
Specifications are subject to change without notification.
Item Specification
Dimensions
Proprietary to fit F5 Networks chassis
Weight
14.5 lbs (6.58 kg)
Processors
Two Dual-Core AMD Opteron™ processors
Network Interfaces
1x10/100/1000 Ethernet Management port
8x10/100/1000 Copper ports
12x1000Base-X SFP Fiber/Copper ports
• 1000BASE-SX - 850nm (LC Connector, 4 modules
included)
• 1000BASE-LX - 1310nm (LC Connector, optional)
• 1000BASE-T Copper SFP (RJ45 Connector,
optional)
• 10BaseT, 100BaseT, 1000BaseT Copper SFP (RJ45
Connector, optional)
2x10 Gigabit XFP ports
10GBASE-SR - 850nm (LC Connector, optional)
Hard Drive Capacity
160 Gigabyte ATA hard drive
8 Gigabyte Compact Flash
RAM
8 GB
Typical power draw
(under heavy load)
300W
Maximum power draw
325W
Typical heat generated
1025 BTU/hour
Maximum heat
generated
1100 BTU/hour
Table 9.5 The PB100 blade specifications