F5 Viprion - VIPRION PB200 Blade Specifications

Platform Specifications
Platform Guide: VIPRION
®
9 - 5
PB200 blade specifications
The following specifications apply to the PB200 blade only.
WARNING
This platform supports only optics modules provided by F5 Networks.
Important
Specifications are subject to change without notification.
Item Specification
Dimensions
Proprietary to fit F5 Networks chassis
Weight
14.5 lbs (6.58 kg)
Processors
Two Quad-Core AMD Opteron™ processors
Network Interfaces
1x10/100/1000Mbps Ethernet management port
4x1000Mbps Ethernet copper ports
8x1000Mbps/10Gps Ethernet SFP+ fiber ports
• 10GBASE-SR - 850nm (LC Connector, two modules
included)
• 10GBASE-LR/LW - 1310nm (LC Connector, optional)
• 1000BASE-SX - 850nm (LC Connector, optional
• 1000BASE-LX - 1310nm (LC Connector, optional)
Hard Drive Capacity
160 Gigabyte ATA hard drive
8 Gigabyte Compact Flash
RAM
16 GB
Typical power draw
(under heavy load)
325W
Maximum power draw
350W
Typical heat generated
1100 BTU/hour
Maximum heat
generated
1200 BTU/hour
Table 9.6 The PB200 blade specifications