FAAC TM2 ERY - Deleting the Limit Switch Positions

TM2 ERY 29 A4518_6G40_Rev.A
TOTAL DELETING OF THE LIMIT SWITCHES
Tn: Already programmed remote control
Tn Tn Tn (4 sec)
DELETING THE LIMIT SWITCH POSITIONS
DELETING THE OPENING LIMIT SWITCH
To delete only the opening limit switch perform the following steps and proceed
with “ SETTING THE OPENING LIMIT SWITCH”.
Tn: Already programmed remote control
Tn Tn Tn (2 sec)
DELETING THE CLOSING LIMIT SWITCH
To delete only the closing limit switch perform the following steps and proceed
with “SETTING THE CLOSING LIMIT SWITCH”.
Tn: Already programmed remote control
Tn Tn Tn (2 sec)
NB: by deleting the limit switches, the setting of the closing force is maintained.
+
B C
+
B C
+
A B
+
B C
+
B C
C
+
B C
+
B C
+
B C
EN