TM2 ERY 31 A4518_6G40_Rev.A
This system, the only one of its kind, guarantees that
cassette-awnings remain perfectly closed, without
any danger of the canvas suffering excessive trac-
tion. The system works in all kinds of applications,
thanks to the possibility of manually adjusting
the closing force. The motor is factory set to a
closing force of 40% of the nominal torque (e.g.:
40% of 50 Nm = 20 Nm). This force can be changed
very easily by the remote control. It can be reduced
by 20% or increased up to 70%, depending on the
desired result.
CLOSING FORCE ADJUSTMENT
2 sec
70 %
40 %
20 %
Tn
+
B C
A A
C
B
MAXIMUM CLOSING FORCE ADJUSTMENT 100%
- only for motors from 32 Nm -
A close attention on activating this function is recommended, excessive closing
force may damage the awning.
By activating this function the motor will apply its maximum nominal torque, (e.g.
100% of 50 Nm = 50 Nm).
Tn
+
B C
A
2 sec
+
A C
Tn: Already programmed remote control
EN
To Next Page
Loading...
