10
Use a brush to clean all the holes where the liquid passes through and clean also
the silicon pipe (S) .
S
Place ½ liter of cold water into a container and add a dose of liquid detergent (see product instructions). •
Wash the separte parts, removing any organic residue with a sponge. •
Immerse all mixer parts in the solution (water – detergent) for at least 15 minutes.•
Remove all parts from the solution and rinse.•
11
4
P
Reassemble the parts and attach the mixer to its base.
Note: Take care when reattaching the mixer blade (4) to the pin (P), and make sure the two flat parts on the 2 components
match.
Note: Take care when reattaching the mixer conveyor (3) to water nozzle (H).
12
3
H
After the machine has returned to its normal working conditions, simultaneously press the keys (26) and (28) for at least
a second to perform a washing cycle.
13
65
English
To Next Page
Loading...
