30
4 / CARING FOR AND CLEANING YOUR APPLIANCEEN
• CLEANING THE OUTER SURFACES
• CHANGING THE LIGHT BULB
To clean the outside of your hood, use soapy water, but never use abrasive creams, corrosive
detergents, scrubbing sponges or brushes. Wipe down with a soft, damp cloth.
Model with halogen bulb
— Remove the lighting port
— Change the halogen bulb.
— Replace the bulb by repeating these
steps in reverse order.
Warning
Before carrying out any work, the power supply to the hood must be turned off, either
by unplugging it or by using the circuit breaker switch.
To Next Page
Loading...
