13
DDS
HARDWARE
Ref.1310
Title DRIVE DDS. Hardware manual.
Type of documentation Description, installation and start-up of digital servo drives.
Electronic document man_dds_hard.pdf.
Language English.
Manual reference Ref.1310.
Web The user must always use the latest reference of this manual, available on
FAGOR'S corporate website. http://www.fagorautomation.com
Email info@fagorautomation.es
Internal code It belongs to the manual directed to the manufacturer (OEM). The manual
code is:
Startup
Warning
Headquarters Fagor Automation, S. Coop.
Bº San Andrés 19, apdo. 144
CP. 20500 - Arrasate - Mondragón
Gipuzkoa (Spain)
www.fagorautomation.com
info@fagorautomation.es
- ABOUT THIS MANUAL -
MAN REGUL (IN) STAN Code 04754001
MAN REGUL (IN) AVANZ Code 04754021
DANGER. In order to comply with the EC seal indicated on the compo-
nent, verify that the machine on which the servo system is installed com-
plies with European Directive 2006/42/EC on machine safety.
Before starting the servo drive system up, read the instructions in chapter
1 of this manual.
WARNING. The information described in this manual may be subject to
changes due to technical modifications.
FAGOR AUTOMATION, S. Coop. reserves the right to change the contents
of this manual without prior notice.
Customer support + 34 943 719200
Service Department + 34 943 771118
To Next Page
Loading...
Need help?
General
