Falcon SG700RM-1SC - Page 25

24
4.3.2.5 UPS Default Settings and Special Function Execution
After the UPS completely starts up, press the Function button to
change the LCD display to figure Q1.
Q1
Buzzer “On”
Q2
Buzzer “Off”
Press the Next Page button to scroll through the UPS settings. The
LCD will display in sequence: figure Q1 (buzzer)  figure R1 (Self-test) 
figure S1 (Bypass Voltage Windows)  figure T (Output Frequency
Synchronization Window)  figure U (Inverter Output Voltage)  figure V1
(UPS Operation Mode)  figure W (Inverter Voltage Adjust).
R1
Self-test is not “On”.
R2
Self-test is “On”