If using an Axe-FX II or other device that supports in preset multi-options (called X/Y in Axe-FX II), then you can
let the LF+ know if this particular IA-Slot will be syncing to the effect itself, or to the X/Y selection of the effect
within the preset. LF+ supports both types of sync features.
(ON color for this IA Slot)
(OFF color for this IA Slot)
(Bypass color for this IA Slot)
(Blocked color for this IA Slot)
IA Slots default to GREEN for ON, RED for BYPASSED and OFF for the off state. You will update these parameters
to customize the IA Slot to your liking.
IA Switches have the ability to maintain their “Step State”. By default an IA Slot will not recall its last step state
when power cycled. All IA Slots will begin on Step 1 for IA Slots with Steps. If “Remember Last Step” is selected,
then during power-up, the IA Slot will reconfigure itself to its last known processing state.
To Next Page
Loading...