ENGLISH
65 / 73
Make sure that you browse your files via the correct browser mode which
means correct filtered views such as Photos, Music, or Movies.
Question 5. During power on, why does the TV will have a short flashing,
blue screen or screensaver?
Answer:
This is normal, when the system initializes, it will setup the corresponding
parameters so it can output the correct video signal to the TV, during the
initializing time, the TV will receive incorrect signals or the signals will not be
stable and will cause the TV screen to flash, some TV’s will treat this as no
signal, and will display a blue screen or screensaver.
Question 6. Why when I switch to Y/Pb/Pr 480p, 576p, 720p, 1080i, and
1080p, does the TV screen display an unwatchable picture?
Answer:
Please check if your TV supports Y/Pb/Pr 480p, 576p, 720p, 1080i, and 1080p
output, if your TV does not support, please use the A/V signal display instead,
press the TV SYSYEM button on the remote control, then switch the TV’s
video input to NTSC or PAL.
Question 7. Why is there no sound on movie or music playback when
using Y/Pb/Pr component output?
Answer:
Y/Pb/Pr output is a video output only, and does not include sound signals.
When using Y/Pb/Pr output, please plug the A/V OUT or the S/PDIF jack to
output sound.
Question 8. I cannot get SSID name, the screen always displays: ‘Can’t
get any SSID!!’
Answer:
When the WLAN USB Adapter is connected to the player, it needs some time
to get initialized. Please wait for about 1~2 minutes and try refreshing the SSID
list again.
Question 9. I cannot see files shared on my computer via
Browser->Network menu.
Answer:
Please check following items:
1) Connect the player to network and obtain an IP address first;
2) Please enable NetBIOS of TCP/IP on computer;
3) Please check your PC’s firewall settings;
4) Please enable your PC’s ‘Guest’ account;
5) Please share the folders which you wish to browse on your PC, and make
sure that ‘Everyone’ or ‘Guest’ has the right to access.
To Next Page
Loading...