Need help?Do you have a question about the Faro ALYA and is the answer not in the manual?
General| Brand | Faro |
|---|---|
| Model | ALYA |
| Category | Dental equipment |
| Language | English |
Explains manual and label symbols for warnings, cautions, and information.
Describes the device's purpose and target users in dentistry.
Details professional qualifications, skills, and experience required for users.
Outlines critical standards, warnings, and prohibitions for safe operation.
Details electromagnetic compatibility requirements and guidelines.
Provides an overview of the light source, adjustment methods, and synchronization features.
Identifies and illustrates the various components of the dental light and its arms.
Explains how different variants of the Alya system are identified through part numbers.
Displays key dimensions for determining clearance and installation space.
Covers general electrical requirements and installation procedures for dental lights.
Specifies the maximum safe working loads for the mechanical arms and joints.
Details the procedure for installing the complete light directly onto a dental unit.
Explains how to connect the remote control cable for the light.
Provides instructions and warnings for installing the light on a ceiling mount.
Highlights critical electrical and safety warnings for wall installation.
Details electrical safety and suspended mass warnings for floor installation.
Outlines the mechanical specifications and space needed for headlight installation.
Details the electrical specifications for the correct installation of the headlight.
Describes the procedure for attaching the joystick lever to the unit.
Explains how to operate the light, including turning it on/off and adjusting brightness.
Details how to switch on/off and adjust the light using the joystick.
Explains operation using the proximity sensor for switching and adjusting light intensity.
Covers operation using a remote control for switching and adjusting light intensity.
Describes how to pair the Alya lamp with a Faro Room Light for synchronized lighting.
States that ordinary maintenance is not foreseen and only service engineers can perform repairs.
Provides instructions for cleaning the light's reflecting parabolas using specific agents.
Details the cleaning procedure for the light head, specifying approved detergents.
Outlines the cleaning process for the light's arms and joints, with warnings on chemicals.
Explains how to safely remove the handle from the support for cleaning or sterilization.
Details the necessary steps for decontaminating and disinfecting the handles before sterilization.
Specifies parameters and procedures for sterilizing the handles according to standards.
Checks for joint play, oxidation, and enclosure damage to ensure mechanical integrity.
Covers electrical safety compliance and verification of light output parameters.
Explains the meaning of acoustic signals (beeps) generated by the device.
Provides a quick reference for common issues and their solutions.
Details power supply voltages, maximum power, and recommended fuses for different configurations.
Specifies device classification, maximum illuminance, color temperature, and spot size.
Shows the electronic board located within the light head.
Illustrates the electronic board for the rear arm, specific to the Theia Tech option.
Presents the electrical wiring diagram for the light with a transformer, using a joystick control.
Provides the electrical wiring diagram for the light without a transformer, using a joystick control.
Details the electrical connections for the Theia Tech version with a secondary rear arm light.
Shows the electrical wiring diagram specifically for the dental light head unit.
To Next Page
