ALYA INSTALLATION AND USER’S MANUAL - EN
Edition 2.0 Sept 2018 Pag. 3 di 32
1 SAFETY REQUIREMENTS
Dear Customer,
FARO hopes you enjoy your work with the new high quality light. For safe work and to take full advantage of
the performance of the product, read carefully this manual before using the device.
In particular, follow all the warnings and the notes given.
FARO offers the final customer a 24 month warranty starting from the date of purchase. Repairs under
guarantee must be performed at FARO; expenses and transport risks are at the risk of the purchaser. Repair
under guarantee is considered valid only when all sections of the certificate have been filled in and sent in
advance to FARO by Fax (+39 039 6010540) or by email: service@faro.it
The warranty covers faults due to the bad quality of the material or manufacturing defects; in case
of valid claims, the guarantee covers free repair or replacement. Claims for damages and/or interest are
excluded. The guarantee is not considered valid, at the sole discretion of FARO, if the fault is due to
tampering, damage, incorrect use, improper maintenance and normal wear and tear.
1.1 SYMBOLS USED
1.1.1 Symbols used in the manual
The paragraphs marked with this symbol contain instructions that must be carefully followed to avoid
damaging the device, harming the operator or the patient.
These instructions warns you that you must pay attention to avoid situations that could damage the device.
This icon highlights what you should not do to avoid damaging the device.
This icon supplies information that allows you to use the device more efficiently.
1.1.2 Symbols on the labels
The data plate is fixed:
• for the complete light or arms: on the rear arm
• for the head: under the heat sink cover
and outlines the following data:
Serial Number (SN): year (YY) / range of origin (LD for dental light - TE for head only) plus the progressive
number (NNNNNN) e.g.: SN14LD000001 for the complete light SN 14TE000001 for the head.
The following standardized symbols are also present:
Read the instructions use. Supplied by Electronic means.
Manufacturer symbol according to Directive 93/42/EEC
The instructions for use include safety warnings
WEEE equipment according to the Directive 2012/19/EC. Dispose of
the product according to this directive.
Double insulation. Class 2 device against electrical risk
Can be sterilized with heat at 134°C
Use the device at a temperature between 10°C and 40°C
Use the device at pressure between 80 kPa and 106 kPa
Use the device at relative humidity between 30 RH and 75RH
To Next Page
Loading...
